You are currently browsing the tag archive for the ‘Minecraft blanket tutorial’ tag.
Tag Archive
…the Enderman. The MineCraft Quilt Kits have been so popular and many of you have asked for different versions and sizes.
So let’s start with the Enderman shall we?
The Enderman is available in two sizes just like the Creeper, a small throw (45″x54″), which is perfect for the game room, a wall hanging, or your bitty one, and the twin/full (54″x72″), which is perfect for their bed.
***Standard mattress sizes for a twin measure at approx. 39″x75-79″ and a full measures at 54″x75″.
This quilt KIT will fit a twin and provide a drop over the mattress on the sides. It will be a few inches shy on the length, but a pillow at the top fixes that:) We keep the sample MineCraft quilt on the twin in the studio, and it looks great!!
Here’s a quick how-to on the Enderman layout and the fabric requirements.
The throw (45″x54″), is a 10×12 setting and uses the following fabrics:
2 Yards Black(includes binding)
1/3 Yard Pepper
5/8 Yard Charcoal
1 Fat Quarter Dark Violet
1 Fat Quarter Hibiscus
Backing 2-2/3 yards for machine quilting
Batting
The twin/full (54″x72″) is a 12×16 setting and uses the following fabrics:
3-1/4 Yards Black(includes binding)
1 Yard Pepper
¾ Yard Charcoal
1 Fat Quarter Dark Violet
1 Fat Quarter Hibiscus
Backing 3-1/3 yards for machine quilting
Batting
Each letter is a 5″ square unfinished. Lay your quilt out, depending on which size/setting, and refer to the photo. Each Kona color has a letter representing the placement. For example, B=Black, P=Pepper, etc. Use the remaining black fabric to cut your 2.5″ binding strips.
For more info on cutting and assembly for the MineCraft quilts, click on the tutorial found here.
***UPDATE 12/20/16 All Enderman kits are sold out from this page. Please visit the Etsy shop if you are interested in purchasing a kit. Thanks!
The Enderman kits are also available to purchase. The kit links are below.. Each kit comes with a tutorial, fabric for the top, binding and choice of backing. Batting NOT included. Please choose which backing you’d like in the notes section when you checkout with PayPal or convo me.
**********************INTERNATIONAL CUSTOMERS**************************
KIT SHIPMENT: Once again, if you are an international customer, please convo me as shipping rates are different for each country. International shipping rates are set by the USPS and KITS are mailed in a flat rate mailer. SewMod does not charge our customers for any ‘handling fees’. A separate PayPal invoice will be made available to you after you convo me with the package destination. I’m happy to help! Thanks.
If you’d like to purchase an Enderman quilt KIT in the THROW (45″x54″) size, click on the PayPal button below. The throw is $48.50 plus shipping.
KIT SOLD OUT
If you’d like to purchase an Enderman quilt KIT in the twin/full (54″x72″) size, click on the PayPal button below. The Twin/full is 68.50 plus shipping.
KIT SOLD OUT
If you’d like to purchase a Creeper KIT in either size, please click HERE.
UPDATE: 12/30/2016 All MineCraft kits are currently sold out!
Looking for a quick birthday or Christmas present for your little gamer this year? If your kids and adults..you know who you are…have been hit by the MineCraft craze, then I know they’d be super excited to have this throw to snuggle up with on the couch. It also makes perfect decor for their bedroom or game room.
I’ve made a lot of MineCraft quilts! And I’ve had a few questions on size and cutting, so I thought I’d share with you how easy this is to make! A great beginner project from start to finish.
MineCraft Creeper Quilt
Supplies:
1 Half Yard Black
5 Half Yards Assorted Kona Greens in Honeydew, Basil, Grass, Tarragon & Chartreuse
Binding: scrappy or 1/2 yard, cut into 2-1/2″ strips
Backing 2-2/3 yards for machine quilting.
Batting 48″ x 57″
Quilt measures approx. 45″ x 54″
With a 10 x 12 setting, you will need (120) 5″ (charm) squares…
20 black & 100 green. I used a variety of Kona Cottons in green to create the pixel effect.
1/2 yard = 24 charm squares
Minecraft needs (5)-1/2 yards for variety
Cut each half yard into 3 strips of 5″ WOF.
You will have a little strip left over after cutting the (3) 5″ strips. Save those for your scrappy binding.
Trim the selvedge from your 5″ strips.
Cut each strip into (8) 5 inch squares. These are doubled from cutting…Each half yard will yield 24 squares.
Lay your quilt out according to the drawing in a 10 x 12 block setting. And if you’re wondering…why, yes, I was working on this at Starbucks and all this green talk made me thirsty for a Green Tea Frappuccino!
Sew your charm squares together into rows, Pressing each row in alternating directions.
Sew the rows together. Press.
For the backing fabric, cut the 2-2/3 yards into (2) 48″ long pieces. Trim the selvedge edges and sew the pieces together lengthwise. Press your seam open. Now you should have a pieced backing that measures approx. 48″ x 84″. We only need a backing that measures approx. 48″ x 57″, so let’s trim about 26″ off of the bottom of the backing. (See photo).
The backing seam will run horizontally in the middle of the back of your quilt instead of vertically. This saved us a little bit of $$ and if your backing is not directional, then it’s no biggie!
**TIP: Use the extra backing and scraps fabric to make a cute matching pillow!
Layer your quilt top, batting and backing.
I can give you a few tips that I use to help me with successful quilting.
This quilt is small enough so that you can work at your kitchen table. I begin by placing a well pressed backing face down. If desired, tape the backing to the table with painters tape. Next, I add batting, smoothing out from the middle so that there are no wrinkles. Finally, I add my pressed quilt top, right side up, on top of the batting, once again smoothing the fabric out from the middle to make sure there are no bumps or wrinkles and taping the top down to decrease puckering.
Pin your quilt sandwich well, making sure you’re catching all the layers. The more pins you use, the less likely you will have any puckers as you’re quilting. I use a pin in each of the squares on my Minecraft quilt. ….sorry for the icky pic…indoor lighting in the winter here is, well, icky! I really do need a crash course in Photoshop…
**a note on pins..buy the ‘fine wire‘ pins from the notions wall. They are not the same pins as the ones found in the office supply section at Walmart..no matter how hard your boyfriend tries to convince you that they are lol!
Some of you may need to attach your walking foot at this point to quilt.
To begin quilting, I increase my stitch length .5 and always work from the middle out. So this means when quilting the Minecraft quilt, I start at the top, 5 rows over, and work my way down the quilt and all the way over to one side. Then I work toward the other side from the middle out.
I quilted mine with straight lines approximately 3/8″ on each side of the ‘ditch’, horizontally and vertically to keep with the pixel effect of the game using green thread. I eyeballed it by sewing with the edge of my presser foot butted against the seam as my guide.
Bind your quilt. I like scrappy binding so I pieced all of my leftover strips together. I typically like to cut my binding at 2-1/4″- 2-1/2″ depending on which technique I bind with, whether it be by machine or by hand.
If you’re machine binding, you might find this tutorial helpful.
And in keeping with the ‘theme of the game’, the backing is a black and white skull fabric. So perfect!
sssSSSsss…BOOM you’re finished!
**********************INTERNATIONAL CUSTOMERS**************************
KIT SHIPPMENT: Once again, if you are an international customer, please convo me as shipping rates are different for each country. International shipping rates are set by the USPS and KITS are mailed in a flat rate mailer. SewMod does not charge our customers for any ‘handling fees’. USPS prices for Canada are $20.85 and “everywhere else” including Australia and Europe are $25.25. A separate PayPal invoice will be made available to you after you convo me with the package destination. I’m happy to help! Thanks.
***If you’d like a MineCraft Quilt KIT, twin/full size 54″x72″, click on the PayPal button below. The full size KIT is 68.50 plus $12.25 in shipping for U.S. customers.THIS SIZE KIT IS SOLD OUT and no longer available.
***Standard mattress sizes for a twin measure at approx. 39″x75-79″ and a full measures at 54″x75″.
This quilt KIT will fit a twin and provide a drop over the mattress on the sides. It will be a few inches shy on the length, but a pillow at the top fixes that:) We keep the sample MineCraft quilt on the twin in the studio, and it looks great!!
***If you’d like a MineCraft Quilt KIT, throw size 45″x54″, click on the PayPal button below. Each KIT is $48.50 plus $5.05 in shipping for U.S. Customers.-THIS SIZE KIT IS SOLD OUT and no longer available.
KITs include enough fabric to make a complete MineCraft quilt, including top, backing, scrappy binding and tutorial. Batting NOT included. If you’d like to replace the Cobblestone grey option below with one of the greens used in the kit as your backing fabric, convo me. I’m happy to help!
To choose your backing fabric, convo me in the ‘Contact Us’ tab at the top of the blog or send me an email at SewMod at hotmail.com. If no backing choice is chosen at checkout or by convo, the kit will be sent with the cobblestone grey.
Attention: The PayPal buttons are for U.S. customers only! Please convo me in the ‘contact us‘ tab or by leaving a comment in this blog posting if you need a shipment outside the U.S. Thanks!
7/31/15 Update! We’re happy to have the Enderman kits available as well as the Creeper. If you’re interested in the Enderman, please click HERE for the blog post. Thanks so much! Lorrie:)
SewMod